|
Serial number
|
C.I.NO
|
The Equivalents
|
|
SW-203
|
Solvent Yellow 2
|
(KKK)Orient Oil Yellow GG
|
|
SW-204
|
Solvent Yellow 14
|
(BASF)Orient Oil Yellow 220
|
|
SW-205
|
Solvent Yellow 16
|
(BASF)Orient Oil Yellow 146
|
|
SW-206
|
Solvent Yellow 18
|
(MRT)Morplas Yellow 9
|
|
SW-207
|
Solvent Yellow 33
|
(BASF)Oplas Yellow 136
|
|
SW-201
|
Solvent Yellow 56
|
(BASF)Sudan Yellow 150
|
|
SW-202
|
Solvent Yellow 93
|
(BASF)Thernoplast Yellow 104
|
|
SW-208
|
Solvent Yellow 98
|
(HDC)Elbaplast Flucrescent Yellow G
|
|
SW-209
|
Solvent Yellow 114
|
(BAY)Macrolex Yellow G
|
|
SW-210
|
Solvent Yellow 163
|
(BASF)Waxoline Yellow 5RR FW
|
|
SW-211
|
Solvent Yellow 176
|
(HST)Solvapexm Yellow G
|
|
SW-503
|
Solvent Orange 60
|
(ORIENT)Oplas Orange 230
|
|
SW-504
|
Solvent Orange 63
|
(HOE)Hostasol Red GG
|
|
SW-506
|
Solvent Orange 86
|
(BASF)Sodam S Orange 261
|
|
SW-601
|
Solvent Red 111
|
(BASF)Waxoline Red MP EW
|
|
SW-602
|
Solvent Red 135
|
(ORIENT)Oplas Red 330
|
|
SW-603
|
Solvent Red 146
|
(HDC)Eibasol Red 3B
|
|
SW-604
|
Solvent Red 149
|
(KEY)Keyplast Fluorescent Red G
|
|
SW-607
|
Solvent Red 179
|
(ORIENT)Oplas Red 338
|
|
SW-608
|
Solvent Red 23
|
(HDC)Elbasol Red P
|
|
SW-609
|
Solvent Red 24
|
(BASF)Sudan M Red 380
|
|
SW-610
|
Solvent Red 25
|
(KRAS)Krasol Dark Red G
|
|
SW-611
|
Solvent Red 52
|
(BASF)Waxoline Rubine TR FW
|
|
SW-612
|
Solvent Red 195
|
(BASF)Thermoplast Red 454
|
|
SW-613
|
Solvent Red 196
|
(HDC)Elbaplast Fluorescent Red 2B
|
|
SW-614
|
Solvent Red 197
|
(HDC)Elbaplast Red G
|
|
SW-615
|
Solvent Red 207
|
(KEY)Keyplast Red M 6B
|
|
SW-616
|
Vat Red 41
|
(HDC)Elbaplast Red B
|
|
SW-401
|
Solvent Green 3
|
(BASF)Alizarine GreenBase
|
|
SW-402
|
Solvent Green 5
|
(BASF)Fluovol Green Gold 084
|
|
SW-403
|
Solvent Green 28
|
(BASF)Waxoline Green 6GFW
|
|
SW-1004
|
Solvent Blue 35
|
(BASF)Sodan Blue 670
|
|
SW-1005
|
Solvent Blue 36
|
(BASF)Sodan Blue FB
|
|
SW-1012
|
Solvent Blue 78
|
(HDC)Elbaplast Blue G
|
|
SW-1013
|
Solvent Blue 97
|
(DYSTAR)Macrolex Blue RR
|
|
SW-1014
|
Solvent Blue 104
|
(HDC)Elbaplast Blue R
|
|
SW-1015
|
Solvent Blue 122
|
(ROSE)Rosaplast Bve R
|
|
SW-303
|
Solvent Violet 13
|
(BASF)Sicosty Red Blue 68-405
|
|
SW-306
|
Disperse Violet 26
|
(ROSE)Rosaplast Violet E 4R
|
|
SW-307
|
Solvent Violet 31
|
(ORIENT)Kiwalon Polyester Violet 2RE
|
|
Disperse Violet 28
|
|
SW-308
|
Solvent Violet 36
|
(DYSTAR)Macrolex Violet 3R
|
|
SW-309
|
Solvent Violet 37
|
(CLH)Sandoplast Violet EBL
|
|
SW-901
|
Solvent Black 3
|
(BASF)Neptun Black X 60
|
Az0-and Apthraquinone-dyes with good miscibility to various plastic materials, such as polyolefins/ps/ABS/PVC¡¡etc¡This range is also good for coloring purpose for petroleum products as well as for oil & fat dyeing.
Solubility Test:
(1)Dissolve 20gm of Dye in 40ml of solvent stir Thoroughly seal the container Tightly and left over night.
(2)Stir the above Sample weight filter paper accurately before filtering the sample. Then put the residue and filter paper inside A thermostate with 50 temperature Until all the liquid evapavated.
(3)Weight the residue(X) Total weight-weight of filter paper).
- Determine the Solubility by calculation:
- 20 40 X 1000=Solubility (gm/l)
Fastness:
- (1)Light resistance:Used standard Blue Scale as comparsion standard
- (2)Heat Resistance:Automatic Constant Temperature Dryer at 180°C for 10 hours.
- (3)Acid Resistance:immerse in 1% H2SO4 solution for 24 hours.
- (4)Alkali Resislance:Immerse in 1% NaOH Solution for 24 hours.
- (5)Standard symbols for test: A:good B:fair C:Poor
Use:
1.BRIEF INTRODUCTION
Higher plastic colorant are most suitable for various plastic materials coloring, with greater color strength, better fastness to heat, light, acid and alkali. This range is generally used in coloring domestic plastic materials, cop tube materials, fat dyeing, lacquers, inks and master batches dyeing. Some of them are suitable for dyeing chemicals fibre, such as dacron, nylon and cellulose acetate fibre.
2.APPLICATION
Hight plastic colorant are solvent dyes with good solubility and miscibility in organic solvents. This range can be used in the following materials alone as well as mixed in proportion:
- (PS) Polystrene
- (HIPS) High impace polystyrent
- (PC) Polycarbonate
- (UPVC) Rigid poly
- (PMMA) Polymethyl methacrylate
- (SAN) Styrene-acrylonitrile copolymer
- (SB) Styrene-butadiene copolymer
- (AS) Acrylonitrile-stryrene copolymer
- (ABS) Scrylonitrile-butadiene-styrene copolymer
- (372) Styrene methyl acrylic acid copolymer
- (CA) Cellulose acetate
- (CP) Cellulose propylene
3.USAGE
The dye is dissolved in plastic in molecular-distribution. Before molding or preplasticizing, add dyes into plastic materials in proportion and stir thoroughly. The shade can be adjusted in demand. You can obtain transparency color in clear resin, or un-transparency color with titanium pigment. Use level:
- Transparency color around 0.02%-0.05%
- Un-transparency color around 0.1%
4.SPECIFICATIONS
- Heat fastness:240-300°C
- Light fastness:6-7 or 7-8
- Migration resistance:3-4 or 4-5
- Colorng strength:100%±3
- Moisture:1% max
- Particular size:60 meshes(passed)
|
